-
Industrial Pressure Transmitter
-
Low Cost Pressure Transmitter
-
Piezoresistive Differential Pressure Transmitter
-
Piezoresistive Pressure Sensor
-
Liquid Level Transmitter
-
Capacitive Fuel Level Sensor
-
Thin Film Pressure Sensor
-
Infrared Temperature Transmitter
-
Digital Pressure Gauge
-
Digital Flow Switch
-
Magnetostrictive Liquid Level Transmitter
-
Industrial Vibration Sensor
-
Liquid Leakage Sensor
-
Submersible Level Transmitter
-
Magnetostrictive Displacement Sensor
5V 25Bar Low Cost Compact Size Pressure Transmitter
Housing | SS304 | Pressure Port | SS304 |
---|---|---|---|
Diaphragm | SS316L | Sealing Gasket | Viton |
Plug Housing | Plastic | Cable | Φ7.5mm Polyethylene Special Cable |
Accuracy | ±0.5%FS | ||
High Light | 25Bar explosion proof pressure transducer,5V piezo capacitive pressure sensor,RoHS 25Bar low cost pressure transmitter |
SPT21C Pressure Transmitter
Features
- Excellent performance
- Short protection, reverse polarity protection
- Gauge, absolute and sealed gauge pressure optional
- Measurement media: liquid, gas and stream
Introduction
SPT21C uses high stable and reliable pressure sensor and special circuit board to made transmitter. This product is used for measure and control of liquid, petroleum, chemi-industry, air, electric power, hydrology and flow pressure measure, etc.
Specification
Pressure range | -0.1…0~0.01…100MPa (-1…0~0.1…1000bar) |
Over pressure | 1.5 times FS or 110MPa (min. value is valid) |
Pressure type | Gauge/absolute/sealed gauge optional |
Process connection | G1/4 male thread (or as per customer’s requirement) |
Accuracy | ±0.5%FS |
Long term stability | max. ±0.3%FS/year |
Offset thermal drift | 0.1%FS/℃(≤100kPa); 0.05%FS/℃(>100kPa) |
Span thermal drift | 0.1%FS/℃(≤100kPa); 0.05%FS/℃(>100kPa) |
Compensated temp. | 0~50℃ |
Application temp. | -30~80℃ |
Storage temp. | -40~120℃ |
Power supply | 12~28VDC |
Output signal | 4~20mADC(2 wires) 0/1~5VDC(3 wires) |
Load resistance | ≤(U-12)/0.02Ω(2-wire), ≥10k(3-wire) |
Housing protection | IP65 |
Electrical connection | DIN43650 plug/M12 connector |
Construction and Outline Dimension
Construction material:
Housing | SS304 |
Pressure port | SS304 |
Diaphragm | SS316L |
Sealing gasket | Viton |
Plug housing | Plastic |
Outline dimension:
Electrical Connection
Note:
- Please pay attention that the media should be compatible with the contacted parts;
- If any special requirements on function or specification, please contact with us freely;
Our service
♦Professional consulation
♦Provide detailed information
♦Offer a reasonable quotation